생성물 | SR % | 균형 | 모양 |
AlSr5 | 5 | 알류미늄 | 코일, CCB, 와플, Stlck |
AlSr10 |
10 | 알류미늄 | 코일, CCB, 와플, Stlck |
AlSr15 | 15 | 알류미늄 | CCB, 와플, Stlck |
알류미늄 Strontium Master Alloy Purpose
알류미늄 Strontium master alloy can be used in die casting, low pressure casting and modification of hypoeutectic and eutectic silicon alloy with long pouring time.
알류미늄 Strontium master alloy differs from other modifiers in that it retains its modification effectiveness for extended periods of melt holding time.
거친 소판에서 미세한 섬유 공융 구조로의 알루미늄-실리콘 합금 주조에서 실리콘상의 형태의 변형은 개선 된 소음 및 기계적 성질을 초래한다.
알류미늄 Strontium Cut Cast Bar Features
알류미늄 Strontium master alloy is a long-term modifier with good structure. which is mainly used in the modification of hypoeutectic and eutectic aluminum silicon alloy. Its modification type is similar to the traditional sodium element, but it has the following advantages:
1. 스트론튬 개질의 유효 기간이 6-8 시간보다 길고, 재용 해의 4-5 배가 여전히 개질 효과를 가지며, 이는 저압 주조 및 다이캐스팅의 요구를 장기간 지속시킬 수 있으며, 특히 대형 주조에 적합합니다. 부품 및 지속적인 생산. 우수한 상태 및 분포, 기계적 성질 및 유동성 향상
2. 사용하기 쉽고, 오염이없고, 낭비가 적고, 비용, 긴 작업 효율 및 유전 효과를 사용하여 낮습니다.
알류미늄 Strontium Cut Cast Bar Parameter
According to customer's usage and process requirements, our 알류미늄 Strontium master alloy products can provide the following 4 shapes,
AlSr5, AlSr10, AlSr15 스틱 : Dia. 9.5mm
AlSr5, AlSr10, AlSr15 CCB (컷 캐스팅 바) : 100-1000g / bar
AlSr5, AlSr10, AlSr15 와플 : 6-8kg / 와플
AlSr5, AlSr10 코일 : 180-220k / 코일
알류미늄 Strontium Cut Cast Bar Package:
스틱 : 10kg / 번들, 1mt / 팔레트, 1mt / 팔레트
CCB : 20kg / 판지, 1mt / 팔레트
와플 : 1mt / 팔레트
코일 : 3 코일 / 팔레트
알류미늄 Strontium master alloy can be produced according to customer’s specification for different strontium content and package,AlSr master alloy containing more than 20% strontium can also be customized.
At present, customers in more than 30 countries are using our 알류미늄 Strontium master alloy and getting good feedback.